The classic and most economical court. Ideal for the entire international market, easy installation, and low maintenance. A prime and muscular model, with high-quality finishes and details. Meets the specifications of the International Padel Federation.
Padel court of 20×10 m. Made with galvanized steel structure painted or covered with baked polyester epoxy resin according to the characteristics of the technical specifications. Electro-welded mesh galvanized 50x50x4mm with delivery without projections inside. Frame unions with threaded rods, washers, and rounded blind nuts in stainless steel. The hollow double entrance door of 1.10 cm. Even poles, net. Finished by the provisions of the FIP on approval of materials. 80.60.2 pillars at the bottoms and sides, and double L-pillars 70.30.2 at 4 m high corners with custom corner butt termination and 80.60.2 at 3 m high intermediates, anchor plates 300x180x10 mm and 200x190x10 mm with 10 mm sheet metal brackets, with screws m14 or higher and metal plugs with a minimum length of 140 mm. Fixing to the floor using “hilti” type plugs or similar, metal structural reinforcement brackets up to 0.5 meters in height on the base of glass support pillars, horizontal crossbars 1 m and 2 m 30x30x2mm for anti-buckling, sealing pillars top with PVC plugs.
The manufacturing processes of the structure of the MEJORSET padel courts are carried out by:
Homologated 10mm tempered glass, mounted on 5 mm neoprene to reduce vibration and breakage. reduce vibrations and breakage.
The manufacturing process of all this tempered glass is manufactured by a standardized production process and in accordance with UNE EN 12150-1.
Advantages of the tempered glass:
The metallic elements are covered with a thermosetting powder polyester paint formulated with polyester resins. This finish, in a color desired by the client, provides these elements with good resistance to corrosion and ultraviolet rays, as well as being highly resistant to mechanical impacts .
Once the powder paint is applied electrostatically on the surface of the material, the pieces go to an oven where they are heated to a temperature between 180ºC-200ºC, in which polymerization occurs.
In coastal / maritime areas where salt fog is formed which, driven by the wind, generates conditions of high risk of corrosion. (especially in the first 100m), we apply a set of extra actions that involve protecting the metal structure of the track against corrosion.
The structure can be painted with the RAL that the client decides, optionally the track can be painted in 2 shades, for example the stalk of the spotlights can be in a different color.
10mm textured turf, artificial turf used in the center court of the main professional tournaments worldwide, stands out for the textured effect of its filaments, providing greater rotational and longitudinal traction capacity. It allows for increased grip, thereby enhancing safety and performance during movements. Ideal for indoor and professional tournaments.Perfect for indoor use and especially recommended for professional tournaments.
Our entire range of turf ensures maximum performance, safety, comfort, and durability, recommended by the Professional Padel Players Association and the International Padel Federation.
12mm monofilament artificial straight grass of the latest generation. This type of surface is ideal for outdoor use due to its composition and faster drainage. It is also recommended for outdoor use, especially in high temperatures, as it better withstands heat.
Available in the four official colors accepted by the International Padel Federation: blue, green, orange/clay, and black.
LED lighting with 8 spotlights of 200W each is specifically designed for our padel courts. To enhance lighting performance, it is possible to either increase the number of lamps or opt for higher-powered ones.
In adherence to NIDE standards, the lighting on a padel court is designed to be uniform, ensuring it does not obstruct the vision of players, the referee team, or spectators. Our lighting systems comply with the UNE EN 12193 standard, which outlines lighting requirements for sports facilities.
Various lightning structures are available, including curve, Z, and straight configurations, providing flexibility to suit different court layouts and lighting needs.
The advantages of LED projectors for Padel courts:
We strive to make business easy, dynamic, and extremely understandable, just like in padel.
Configure the ideal court with our 3D configurator or contact us so we can send you the design that best suits your needs.
We will arrange a video call to clarify any details or resolve any possible doubts.
Once the agreement is signed and the commercial proposal is accepted, we start working to ship and install your courts.
The average court construction and installation time are 33 days (30 days factory and 3 days installation). Transportation depends on location.
%402x.svg){kind=icon}
